產品詳情
簡單介紹：
插頭線滾桶跌落試驗機測試插頭線在經過一定次數自由跌落後的**與可靠度。試法是把插頭含後端電源線 100mm 處剪斷，作為試件，投入滾桶內，依試件重量設定標準所要求之跌落次數，使試件連續落下撞擊，到達設定次數後，本機自動停機，然後取出試件檢查受損程度。
詳情介紹：
IEC884-1、GB2099.1、VDE0620、BS1363
插頭線滾桶跌落試驗機測試插頭線在經過一定次數自由跌落後的**與可靠度。試法是把插頭含後端電源線 100mm 處剪斷，作為試件，投入滾桶內，依試件重量設定標準所要求之跌落次數，使試件連續落下撞擊，到達設定次數後，本機自動停機，然後取出試件檢查受損程度。
Cut off the cord with 100mm behind plug as being a test specimen。Put it into Tumbling barrel，then preset the tumbling numbers according to the weight of test specimen。Check the damaged degree of the test specimen ( which is subject to the above successive drops and impacts ) after the preset numbers are reached。
插頭線滾桶跌落試驗機測試插頭線在經過一定次數自由跌落後的**與可靠度。試法是把插頭含後端電源線 100mm 處剪斷，作為試件，投入滾桶內，依試件重量設定標準所要求之跌落次數，使試件連續落下撞擊，到達設定次數後，本機自動停機，然後取出試件檢查受損程度。
Cut off the cord with 100mm behind plug as being a test specimen。Put it into Tumbling barrel，then preset the tumbling numbers according to the weight of test specimen。Check the damaged degree of the test specimen ( which is subject to the above successive drops and impacts ) after the preset numbers are reached。
|
滾動速度 Tumbling speed |
5r.p.m ( 即每分鐘跌落 10 次 ) |
|
計數器 Counter |
電子式，6 位數，到達設定次數自動停機 Electronic type 6 digits，auto-stop during the preset numbers are reached |
|
電源 Power |
AC220V / 50Hz |